Cisco (CAB-9K10A-SW=) Standard Power Cord

Cisco Systems, Inc

CAB-9K10A-SW=

http://www.cisco.com/c/en_au

Cisco

CAB-9K10A-SW=

Standard Power Cord

Each power supply has a separate power cord. Standard power cords or jumper power cords are available for connection to a power distribution unit that has IEC 60320 C19 outlet receptacles. The jumper power cords, for use in racks, are available as an optional alternative to the standard power cords. For more information, contact your Cisco Technical Support.

The standard power cords have an IEC C19 connector on the end that plugs into the Power Distribution Unit (PDU), which is located in the bottom slot at the rear of the chassis. The optional jumper power cords have an IEC C19 connector on the end that plugs into the chassis' PDU and an IEC C20 connector on the end that plugs into an IEC C19 outlet receptacle.

Standard Power Cord

BS 1363A

1 x BS 1363A Male

IEC 60320 C15

1 x IEC 60320 C15 Female

• Switch
• Power Supply

50 Hz

2.50 m

• Cisco Nexus 5000 Series Switch
• Cisco Power Supply