Cisco (CISCO3845-AC-IP) 3845 Router with Power over Ethernet

Cisco Systems, Inc

CISCO3845-AC-IP

http://www.cisco.com/c/en_au

Cisco

3800

3845

3845 Router with Power over Ethernet

The integrated services routing architecture of the Cisco 3845 builds on the powerful Cisco 3700 Series routers designed to embed and integrate security and voice processing with advanced services for rapid deployment of new applications, including application layer functions, intelligent network services, and converged communications. The Cisco 3845 supports the bandwidth requirements for multiple Fast Ethernet interfaces per slot, time-division multiplexing (TDM) interconnections, and fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE), while still supporting the existing portfolio of modular interfaces. This ensures continuing investment protection to accommodate network expansion or changes in technology as new services and applications are deployed. By integrating the functions of multiple separate devices into a single compact unit, the Cisco 3845 dramatically reduces the cost and complexity of managing remote networks.

Router

2

15.0

Gigabit Ethernet

300 W

3U

Rack-mountable

133.4 mm

438.2 mm

406.4 mm

20.41 kg

Network-Module slots:

• These slots can accommodate a standard network-module, enhanced-network-module (NME), enhanced-extended-network-module (NME-X), and high-density extension module (EVM-HD)
• Maximum number of network modules, NMEs, and NME-Xs supported: 4
• Maximum number of NMD/NME-XDs supported: 2
• Maximum number of EVM-HDs supported: 2

HWIC slots:

• These slots also support VICs, VWICs, and WICs

PVDM slots:

• These slots accommodate digital-signal-processor (DSP) modules for packet voice processing

Rack-Mounting:

• National Equipment Building Standard (NEBS)/European Telecommunication Standards Institute (ETSI) options

Power Dissipations:

• AC without IP phone support: 435W (1485 BTU/hr)
• AC with IP phone support-System only: 555W (1890 BTU/hr)
• AC with IP phone support-IP phones: 360W (1128 BTU/hr)

Operation Altitude:

• Up to 6500 ft (2000m), derate 1°C per 1000 ft

Noise Level:

• 56 dBa typical, 58 dBa maximum

• IEEE 802.3: 10BASE-T
• IEEE 802.3u: 100BASE-TX
• IEEE 802.3ab: 1000BASE-T
• IEEE 802.3af: Power-over-Ethernet
• USB 1.1

Safety:

• UL 60950
• CAN/CSA C22.2 No. 60950
• EN 60950
• AS/NZS 60950

EMC:

• 47 CFR, Part 15
• ICES-003 Class A
• EN55022 Class A
• CISPR22 Class A
• AS/NZS 3548 Class A
• VCCI V-3
• EN 300386
• EN 61000

TELCOM:

• 47 CFR, Part 68
• TIA/EIA/IS-968
• CS-03
• RTTE Directive